Foot Rest

Place the Foot Rest onto the four Support Castings. Align the holes and bolt the Foot Rest to the Support Castings using the tightening-sequence.

Quick Release Height Adjustment Clamp

1. Loosen the Wing Nut and open the Clamp. Lift the Threaded Post and spin the Lock Nut to the approximate desired height.
2. Close the clamp and latch the Wing Nut but only tighten it slightly.
3. Spin the Threaded Post until the desired height is achieved.
4. Tighten the Wing Nut securely then securely tighten the Lock Nut against the Clamp.

Seat Attachment

When attaching the seat cushion to the base, make sure that the two halves of the Seat Clamp Bracket are parallel by adjusting the Hex Nut and Wing Nut accordingly. Tighten the Wing Nut  securely to keep the seat cushion from turning.
If you prefer the seat cushion to follow your body as your play, loosen the Wing Nut slightly.

Back Rest

The D-2000BR features an adjustable Back Rest with adjustments for front/back and up/down  positioning for optimum support and comfort.

Back Rest Attachment

Assemble the Allen head bolts and washers in the sequence shown and attach the Back Rest  to the Bracket under the seat cushion. Tighten the bolts securely.

Back Rest Replacement

The Dual-Zone cushion allows sitting on either the tapered or straight ends of the seat. Attach  the Back Rest to the appropriate side of the seat using the four Allen head bolts and the provided Allen wrench.

Front/Back Back Rest Adjustment

To move the Back Rest toward you, turn the adjustment knob clockwise; likewise, to move the Back Rest away from you, turn the adjustment knob counterclockwise.

Up/Down Back Rest Adjustment

Loosen the Adjustment Knob and slide the Back Rest up or down to the desired position and tighten the Adjustment Knob